Stocking Fillers Under £15: Small Vaporizer Upgrades as Gifts
In short: if you know their vaporizer model, give matching screens, stem caps, dosing capsules or a spare glass mouthpiece. Those get used. If you don't know the model, a pick and tamper tool set is the safest choice. Only buy glass after checking it fits: a part for an Arizer Solo won't fit a Mighty.
Every item below was under £15 on The Vapetrix when we wrote this guide, at the base option shown. Prices can change and some products have bigger packs that cost more, so the price on the product page and in your basket is the one that counts. Looking for a dry herb vaporizer gift under £15 without picking a device? Browse our vaporizer accessories. For bigger gifts, see our 2026 gift guide.
- First, find out which device they have
- For any dry herb vaporizer owner
- For Arizer owners
- For Mighty, Crafty, Venty and Veazy owners
- For POTV Lobo owners
- For TinyMight owners
- For DynaVap owners
- Frolic, XQ2 and Tempest 2
- Easy pairings
- Gifting tips
- FAQ
First, Find Out Which Device They Have
The quickest way to choose good vaporizer stocking fillers is to start with the device, not the gift. Nearly every useful small part is model-specific. If you can't ask directly, look at the device name printed on it or its box, or check a photo. If you really can't find out, stick to the "any owner" picks below.
If all you have is a glimpse or a photo, these clues narrow it down:
| What you notice | Probably | Section |
|---|---|---|
| A long glass tube pushed into the top of a slim upright body | Arizer Solo or Air series | Arizer |
| A short glass stem pushed into a small, rounded handheld | Arizer ArGo | Arizer (ArGo) |
| A chunky handheld with a removable plastic cooling unit and mouthpiece on top | Storz & Bickel Mighty, Crafty, Venty or Veazy | Storz & Bickel |
| A pen-sized metal or glass stick heated with a flame or a separate heater | DynaVap | DynaVap |
| A desktop box with a whip or balloon | Arizer XQ2 or Extreme Q | XQ2 |
If the name is printed on the device or box, trust that over any visual guess.
For Any Dry Herb Vaporizer Owner
- Pick and tamper tool set: four 70 mm stainless tools for loading, stirring and lifting out screens. Small, useful and suits almost any device. Stock is limited, so check it's still available.
- Desktop stem organiser: a weighted stand with a flexible silicone grid that holds stems and tubes upright. Only for someone you know owns several stems or tubes.
- 10 mm to 14 mm glass joint adapter: only if you know they use a water pipe, their adapter has a 10 mm male joint and the pipe has a 14 mm female joint. It works one way only, so skip it if you are unsure.
For Arizer Owners
Solo and Air series (not ArGo)
- Silicone stem caps, pack of 10 (or the smaller pack of 5): Handy for carrying loaded stems. These are thick and grip well, but note they do not fit the stock Arizer plastic travel tubes.
- Triple-size O-ring kit: six O-rings in three sizes to make a loose stem sit snugly again.
- Filter screens: pre-shaped concave screens that push into the stem with no cutting, in five variations including fine and coarse mesh.
- Stem backspacers: glass spacers that keep the load a set distance from the heater. A nice "I didn't know this existed" gift.
- 110 mm angled glass stems, two-pack or 70 mm short stems, two-pack: a spare for when one breaks.
- Mini water bubbler: a small glass bubbler for the Solo 2 and 3 and Air 2 (including Max versions).
ArGo
For Mighty, Crafty, Venty and Veazy Owners
- Normal screen set: pre-shaped screens listed for the Mighty, Crafty, Venty, Veazy and Plenty. Venty owners can also have the Venty-specific set.
- Glass dosing capsules, pack of 3: open-top glass cups that drop into the chamber for smaller, tidier sessions.
- Glass chamber reducer: for owners who want smaller loads in the chamber.
- Short glass mouthpiece (Mighty and Crafty) or short glass mouthpiece (Venty). Our glass mouthpieces fit with silicone gaskets, which feel less locked-in than the original plastic.
- Mighty stand: a 3D-printed stand that holds a Mighty or Mighty+ upright on a desk.
For POTV Lobo Owners
- Dimpled glass stems, two-pack in five colours: the same style as the stock stem, plus a spare.
- Brass screens, pack of 50: enough for a long time.
- 45 mm short stems: the most compact option.
For TinyMight Owners
- TinyMight 2 stem caps, pack of 5: for carrying pre-loaded stems.
- Drop'n'Tip glass dosing capsules for the TinyMight 2 and 1.
- Basket screens, pack of 10.
- Glass stem with built-in screen.
For DynaVap Owners
- Titanium CCD screens: the smallest pack is the stocking-sized one.
- Stainless CCD screens, again choosing the smallest pack.
These suit DynaVap models with a metal tip, such as the M 7. They are not for the all-glass G3.
Frolic, XQ2 and Tempest 2
- LimeLight Frolic: glass dosing capsules, a glass chamber reducer or a 70 mm glass stem.
- Arizer XQ2 and Extreme Q: dome screen caps, spare cyclone bowls or the ultra-thick silicone whip.
- Tempest 2: a replacement bowl screen.
Easy Pairings That Feel Like a Proper Gift
If you'd like to give two things, choose two that work together:
| Owner | Pair | Why it works |
|---|---|---|
| Solo or Air | Stem caps and a 70 mm short stem | A ready-to-go spare stem with a cap on it |
| Mighty or Crafty | Glass dosing capsules and a normal screen set | Tidier sessions now, fresh airflow later |
| Venty | Venty screen set and the short glass mouthpiece | A consumable plus a small upgrade they'll notice |
| Lobo | Dimpled stem two-pack and brass screens | A spare stem, plus screens to last a long time |
| TinyMight 2 | Drop'n'Tip capsules and stem caps | Capsules for quick reloads, and caps for carrying a loaded stem |
| Not sure | Pick set (or organiser) and a card saying you'll buy the right screens once they tell you the model | Useful now, and the right part later |
Gifting Tips
- Consumables are safe bets. Screens and seals always get used.
- Glass is a nice surprise but check the fit. Look for the device name in the product title and compatibility list.
- Order early. Delivery networks get busy in December. Leave room for delays.
- Combine two small things. Screens plus stem caps, or capsules plus a pick tool, make a better-feeling gift than one item.
Vaporizer Stocking Fillers: FAQ
What if I don't know which vaporizer they own?
Go for the pick and tamper set, or the desktop organiser if you know they own several stems. Screens, stems and mouthpieces are model-specific and are a gamble without knowing the device.
Will Solo parts fit an Arizer ArGo?
No. The ArGo uses its own smaller glass stems, caps and screens, which is why it has its own section above.
Do Mighty parts fit the Crafty?
Often, yes. Our short glass mouthpiece for the Mighty and Crafty fits the Mighty, Mighty+, Crafty and Crafty+, and Storz & Bickel says the filling chambers of the Venty, Veazy, Mighty+ and Crafty+ are identical, so screens and capsules are shared. Mouthpieces for the Venty are a different fit.
Are these official parts?
Most are aftermarket accessories rather than parts from the device maker. Each product page names the brand and the devices it fits.
Is everything really under £15?
It was at the base option when we wrote this. Bigger packs cost more and prices can change, so check the product page and your basket.
Not sure if something fits? Contact us with the device name before you order and we will check it for you.
