One adapter, three sizes
Covers the most common female joint sizes, so it suits most water pipes.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Smoother draws
Run your Frolic through water for cooler, filtered vapour.
Quick to swap
Fit or remove it in seconds when you switch between dry and water.
Check your joint
Make sure your water pipe has a 10mm, 14mm or 18mm female joint.
Fit it to your Frolic
Fit the adapter to your Frolic in place of the stem.
Seat it in the water pipe
Lower it into the joint until it sits snugly.
Draw and clean
Draw slowly. Afterwards rinse with warm water or isopropyl alcohol and dry fully.
What's in the box
- 1 x 10/14/18mm WPA for the LimeLight Frolic
Your LimeLight Frolic is not included.
Water pipe not included.
| Length | About 60mm |
|---|---|
| Joint sizes | 10mm, 14mm and 18mm female |
| Use | Water pipe adapter |
Made for the LimeLight Frolic:
LimeLight
- Frolic
Don't have a water pipe? Our Plug'n'Play bubbler fits straight on.
| Option | Price | Rating | How it cools | Water | Size | Connection | Best for |
|---|---|---|---|---|---|---|---|
You're viewing 10/14/18mm WPA |
€14,99 | – | Your water pipe | Your own piece | About 60mm | 10, 14 or 18mm female | Using your own water pipe |
 Plug'n'Play Bubbler |
€29,99 | ★ 4.8 (4) | Water filtration | Built in | Compact side bubbler | Plugs straight in, no WPA | Water cooling with no extra glass |
 Vibrant Beads 130mm |
€24,99 | – | Coloured glass beads | No | 130mm | Stock mouthpiece | Dry cooling with colour |
 Spiral 110mm |
€16,99 | ★ 5.0 (1) | Glass spiral | No | 110mm | Stock mouthpiece | Cooling with an open draw |
 Clear Beads 130mm |
€19,99 | ★ 5.0 (2) | Clear glass beads | No | 130mm | Stock mouthpiece | Dry cooling |
-
Review of Spiral 110mm
★★★★★AnonymousVerified buyerGood fit
Good fit, slows draw just enough for a thick cool cloud Easy to clean I love it
-
Review of Clear Beads 130mm
★★★★★AnonymousVerified buyerCool stuff
Cool stuff. I prefer direct connect with TM2 stem but it still a nice experience.
-
Review of Short 70mm
★★★★★Andy DaviesVerified buyerGreat addition to my frolic
Great addition to my frolic. Quick and reliable
-
Review of Clear Beads 130mm
★★★★★AnonymousVerified buyerHappy purchaser
Great addition to my Frolic. Bought twice, one arrived broken but following the returns advice on here I got a replacement in the post next day with no quibble, much appreciated. It slots directly into the cooling chamber mouthpiece with no obvious vapour leakage. Both cooling and flavour feel enhanced. Cleans easy with some iso in a sandwich bag. Very happy.
-
Review of Plug'n'Play Bubbler
★★★★★TVerified buyerMakes flavor great
I typically use the direct output adapter and normally do not use the stock CU. I ordered this just for fun but it made a massive difference on the stock CU. I was even able to turn temp way down and get great clouds. It’s like this creates better airflow not sure. However with this the flavor is so much better and I’m getting vapor much faster. I do not put water in it and run it dry it’s my preferred method.
-
Review of Plug'n'Play Bubbler
★★★★★A.O.K.Verified buyerBrilliant bubbler fits perfect transforms the frolic to another level very happy super quick and well packed delivery
-
Review of Short 70mm
★★★★★JayVerified buyerGreat fit
Great fit. I would prefer one half the size, to be honest, but it is what it is.
-
Review of Angled 110mm
★★★★★D.F.Verified buyerExcellent item and excellent service from Jonny,100% will use vapetrix again.
-
Review of Plug'n'Play Bubbler
★★★★★E.S.Verified buyerExcellent product for the price
Will it fit my water pipe?
Yes, if the joint is 10mm, 14mm or 18mm female.
WPA or bubbler?
Choose the WPA if you already own a water pipe. If not, the Plug'n'Play bubbler is the simpler all-in-one option.
Does LimeLight make a water attachment?
Yes, LimeLight sells its own 14mm and 18mm water attachments. Ours covers 10mm, 14mm and 18mm in one piece.
How do I clean it?
Rinse with warm water or wipe with isopropyl alcohol, then let it dry fully.
Why is my Frolic vapour hot or harsh?
Usually it's temperature, airflow or a short path. A longer cooling stem or water helps a lot. See 7 fixes for hot or harsh Frolic vapour.
Complete your setup
Picked from real orders: these are the items customers most often buy with the 10/14/18mm WPA.
-
Often bought togetherWater Bubbler for the LimeLight Frolic (No WPA Needed, Direct Plug’n’Play) Side Bubbler Accessory€29,99
-
Often bought togetherPick Tool and Tamper, Shovel Set for DHVs - Arizer Solo 3, Mighty, Venty, LimeLight Frolic, Dynavap, TinyMight 2€5,99Sold out
