XMAX V3 Pro and V4 Pro Accessories: Which Glass Stems, Bubblers and Water Pipe Adapters Fit?

The Vapetrix makes six glass accessories that fit both the XMAX V3 Pro and the XMAX V4 Pro: long straight, long angled and short shaded black stems, a cooling beads stem, a 130 mm water bubbler and a 10/14/18 mm water pipe adapter (WPA). Each one needs a compatible black plastic base (mount), which is not included and which we do not sell.

If you are searching for XMAX V4 Pro accessories, or XMAX V3 Pro accessories and parts, this page is the short version of what fits, what does not, and where the limits are. Everything below is a third-party accessory made by The Vapetrix, not an official XMAX product. You can see the full range in our XMAX V3 Pro and V4 Pro accessories collection.

• The black base: read this first
• Glass stems: straight, angled and short black
• Cooling beads stem
• Water bubbler and water pipe adapter
• What does not fit the V4 Pro
• Three quick checks before you order
• Which one should you pick?

1. The Black Base: Read This First

All six accessories are glass pieces. They attach to a compatible black plastic base (or mount), and they do not work without it. That base is not included with our accessories, and we do not sell one, so these are for people who already have it. If yours is missing or damaged, you will need to source a replacement elsewhere before buying glass from us. We would rather say this plainly than have you order glass you cannot use.

2. Glass Stems: Straight, Angled and Short Black

The three stems differ mainly in length and shape, and each is sold as a pack of two, so you have a spare while one is being cleaned.

• Long straight, 110 mm: the Long Straight Glass Stem is the plain option. The longer glass path gives vapor more distance to travel before it reaches your mouth.
• Long angled, 110 mm: the Long Angled Glass Stem has the same length but an angled mouthpiece, which is more comfortable for many people and keeps your face slightly further from the top of the device.
• Short shaded black, 60 mm: the Short Shaded Black Glass Stem is compact, and the dark glass hides normal marks and residue better than clear glass.

Want a closer look at length, comfort and cooling across these glass mouthpieces? See our XMAX V3 Pro glass mouthpieces compared.

3. Cooling Beads Stem

The Glass Cooling Beads Stem is 130 mm long and has glass beads inside the main body. The beads add surface area and break up the airflow, which helps cool the vapor without using water. It is a good middle step if you want a cooler draw but do not want to fill and clean a bubbler.

4. Water Bubbler and Water Pipe Adapter

There are two ways to add water. The first is the all-in-one 130 mm Water Bubbler, which has its own water chamber and a curved mouthpiece, so you need no other glass. Fill it with a small amount of water, do not overfill, and always take it off the device before filling, emptying or cleaning.

The second is the 10/14/18 mm WPA, a stepped glass adapter that connects the XMAX to a water pipe you already own. Check the joint size of your water pipe first: the adapter is made for 10 mm, 14 mm or 18 mm female joints.

5. What Does Not Fit the V4 Pro

We would rather tell you this now than have you find out later. Two of our XMAX-related products are not listed for the V4 Pro:

• The 2, 3 and 5 mm glass spacer set is for the XMAX V3 Pro and the XLux Roffu only. Its web address still contains “arizer-argo” from an old listing, but it is not an Arizer ArGo part.
• The dimpled cooling stem is listed for the POTV Lobo, POTV ONE and XMAX V3 Pro only.

6. Three Quick Checks Before You Order

1. Which model do you have? The six glass accessories are made for the XMAX V3 Pro and the XMAX V4 Pro. Other XMAX models are not covered, and we cannot confirm fit for them.
2. Do you have the black base? If not, sort that out first (see section 1).
3. Do you already own a water pipe? If yes, check the joint size (10, 14 or 18 mm) and consider the WPA. If not, the all-in-one bubbler is simpler.

7. Which One Should You Pick?

• Simple upgrade: long straight stem.
• Comfort: long angled stem.
• Discreet and compact: short shaded black stem.
• Cooler without water: cooling beads stem.
• Water in one piece: water bubbler.
• Your own water pipe: 10/14/18 mm WPA.

8. Cleaning and Care

Borosilicate glass is easy to look after. Soak the piece in isopropyl alcohol, rinse it thoroughly with warm water, and let it dry fully before you use it again. Because the stems come in packs of two, you can swap in a clean one while the other soaks. Handle glass over a soft surface, and remove any bubbler from the device before you fill or clean it so that no water runs into the electronics.

For a wider view of the XMAX against other devices, see our Arizer Solo 3 vs XMAX V3 Pro review and the LimeLight Frolic vs XMAX V3 Pro comparison.

Final Thoughts

The XMAX V3 Pro and V4 Pro share the same six glass accessories, which keeps things simple: pick a stem style, or add water with the bubbler or the WPA. The only catch is the black base, which you need to have already. Browse everything in the accessories for XMAX V3 Pro and XMAX V4 Pro collection.