Water in one piece
Its own water chamber cools and smooths the vapour, with no separate water pipe.
Everything you need to know
Pick a tab for how it works, specs, what it's made for, comparisons, reviews and FAQs.Tap a topic to open it.
Comfortable to use
The curved mouthpiece gives a natural draw angle.
Easy to look after
Take it off, empty, rinse and refill.
Check you have the base
You need the compatible black base (mount) fitted to your XMAX.
Add a little water
Before fitting, add a small amount of water to the bubbler. Don't overfill.
Fit the glass
Push the bubbler into the black base until it sits firmly.
Clean and swap
Remove the glass, soak in isopropyl alcohol, rinse with warm water and dry fully.
What's in the box
- 1 x 130mm water bubbler
Your XMAX device and the black base (mount) are not included. We don't sell the base.
| Material | Borosilicate glass |
|---|---|
| Length | 130mm |
| Mouthpiece | Curved |
| Base needed | Black base, not included |
| Pack | 1 |
Made for the XMAX V3 Pro and XMAX V4 Pro, fitted to the black base (mount):
XMAX
- XMAX V3 Pro
- XMAX V4 Pro
Please note: this glass only works with the compatible black base (mount), which is not included and which we don't sell. Read what fits the XMAX V3 Pro and V4 Pro before you order.
Please check your existing setup and compatibility before ordering. These may not be compatible with other devices so please bear that in mind.
| Part | Price | Rating | Type | Length | Black base needed | Pack | Best for |
|---|---|---|---|---|---|---|---|
You're viewing 130mm Bubbler |
€36,95 | ★ 5.0 (1) | All-in-one water bubbler | 130mm | Yes | 1 | Water cooling in one piece |
 10/14/18mm WPA |
€18,95 | – | Stepped water pipe adapter | About 50mm | Yes | 1 | Your own 10, 14 or 18mm water pipe |
 Cooling Beads 130mm |
€24,95 | – | Glass beads cooling stem | 130mm | Yes | 1 | Cooler without water |
 Long Angled 110mm (2) |
€18,95 | – | Angled glass stem | 110mm | Yes | 2 | Comfortable angle |
 Long Straight 110mm (2) |
€18,95 | – | Straight glass stem | 110mm | Yes | 2 | Simple longer stem |
 Short Black 60mm (2) |
€18,95 | – | Shaded black glass stem | 60mm | Yes | 2 | Compact, hides marks |
 Glass Spacers 2/3/5mm |
€14,99 | – | Glass chamber spacers | 2, 3 and 5mm high | No (V3 Pro only) | 3 | Smaller loads |
See all our accessories for the XMAX V3 Pro and XMAX V4 Pro.
-
★★★★★Marc FreedmanVerified buyer
Works like a dream on my x4
Works like a dream on my x4. Thank you for stocking it and keeping it affordable.
Showing 1 reviews
Is there a water bubbler for the XMAX V4 Pro?
Yes, this one fits the V4 Pro and V3 Pro with the black base. It holds its own water, so you don't need a water pipe.
Do I need the black base?
Yes. This glass fits the compatible black base (mount) for the XMAX V3 Pro and V4 Pro and doesn't work without it. The base isn't included and we don't sell it. See what fits the XMAX.
How much water should I add?
A small amount. Don't overfill, and always take it off the device before filling or emptying so no water reaches the electronics.
Bubbler or WPA?
The bubbler is all-in-one. If you already own a water pipe, the 10/14/18mm WPA connects to it. See XMAX water options.
Does it fit both the V3 Pro and the V4 Pro?
Yes, both, as long as you have the black base. Other XMAX models aren't covered.
How do I clean it?
Empty, rinse with warm water and soak in isopropyl alcohol now and then. See how to clean bubblers.
Complete your setup
Made for the same black base: the other XMAX glass most often bought together.
-
Often bought together10mm, 14mm and 18mm WPA Water Tool for XMAX V3 Pro and XMAX V4 Pro, Pack of 2€18,95
-
Often bought togetherLong Straight Glass Stem for XMAX V3 Pro and XMAX V4 Pro, 110mm, Pack of 2€18,95
-
Often bought togetherShort Shaded Black Glass Stem for XMAX V3 Pro and XMAX V4 Pro, 60mm, Pack of 2€18,95
